How do I use Looft Lighter X?

1. Make a pyramid/pile

Arrange your charcoal (or briquettes) in a pyramid shape in the corner of your grill. This will make the lighting part much easier.

2. Touch and light

Start by locating smaller charcoal pieces in the middle of the pile. Make sure you touch those pieces with the tip of your Looft Lighter X and press the Burn button. Keep contact with the charcoal and you will soon start seeing sparks.

3. Pull back and continue aiming towards the same spot 

When the charcoal starts to glow, pull your Looft Lighter X back an inch or two. This will help the heat to spread. It is important that you continue to aim towards the same spot (rather than lighting multiple locations). We highly recommend switching to Air mode during this step.

1. Make a pyramid/pile

Arrange your logs and smaller pieces of wood in a pyramid shape and place some paper or kindling between the logs.

2. Touch and light

Touch the paper/kindling with the tip of your Looft Lighter X and press the Burn button. Burn mode is now activated and you should start seeing sparks/ flames in seconds. 

3. Pull back

When the fire starts to catch on, pull your Looft Lighter X back a few inches. This will help the fire to spread out and do its magic. We highly recommend switching to Air mode during this step. 

4. Continue towards the same spot

Keep aiming towards the same spot until you have a good fire going.